FEATURES
Your SparX PRO12 Plasma Table base model comes with:
The SparX PRO Plasma Table Series is the Welded Tube Frame Production Platform backed by our Golden Prestige™ Technical Support. Below are SparX PRO Table features
TABLE & FRAME
- SparX PRO Plasma Table: This Wet/Dry Plasma Cutting Plasma Table has a Cutting Envelope of 12′ (L) x 6′ (W). This rapid & precise, SparX PRO Plasma Table is a “No Assembly Required” welded, open tubular frame that holds up to a 2″ inch steel plate and occupies a perimeter area of approximately 14′ (L) x 8′(W) x 5′(H). The Welded Tube Frame includes Water pan support beams and leg supports for rigidity. (Click here to view) The 2100 lb. Unit comes with adjustable, heavy-duty leveling feet (Click here to view) and if you like, as an add-on purchase, you can have us install “STV®CNC Rollerballs” (Click here to view) across the surface edges of your table for you to make transferring material easier. (You will be required to provide 110 VAC for your table and 220-600VAC for your Plasma Cutter of your Choice.)
- E-Stop & USB Connectivity: Production platform has an attached Control box with an installed E-Stop button and USB Connectivity. (6ft USB Connectivity Cable & Power cable included.)
- Water Table: Includes a fully welded 3-inch deep Uni-Pan™ (Single welded water pan; Click here to view), a set of Interchangeable 1.5″ flatbar Slats and welded slat holders. (Click here to view) The Water pan holds about 167 Gallons in volume. We recommend filling your water pans with 8.5 Gallons of Plasma Guard STV®, Anti-Rust Solution (sold separately) and fill the rest of the water pans with Reverse Osmosis Water up to the top of the slats. Important to read action items on the Plasma Guard STV® Page to have it work as intended to, including maintaining your table and its pH Balance. (Click here to read more about Plasma Guard STV®)
THC, HEAD & SENSORS
- THC (Torch Height Control) is an included automatic feature that will assist with torch height by monitoring the plasma arc voltage. The voltage of the arc depends on a few variables, the variable that is most important for THC is the distance from the electrode to the work piece. As the torch moves further from the work-piece, the voltage of the arc increases. As the torch moves closer to the work-piece, the voltage decreases. This is where THC begins to work by monitoring this voltage and adjusting the Z-axis height to maintain an optimal cut height. (Click here to view)
- Z-Axis Head: is an Open Front & Rear Head (with a Z-Axis Travel of 5.5″ inches; Click here to view), machined in-house and built on a precision ground billet ball lead screw with cuppler & Z-Axis Linear Stepper Motor Positioner. The Z-Axis Head also carries your X-Motor 1 of 3 of the Gear Reduction System. (Also See “Torch Setup” below for additional features of the Z-Axis Head.)
- Torch Setup: includes double bracket 4-bolt torch clamp, Magnetic Breakaway (for Torch Crash Prevention from tip-ups; Click here to view), Limit Switch (Floating Head Switch/Material Detection ensures material location and protects from misfires; Click here to view), Collision Switch (trips the collision sensor when it breaks off; Click here to view), Ohmic Sensitivity with White Ohmic Cable for Material Detection in Dry Cut Operations (Click here to view).
- Automatic Homing Kit: The Automatic Homing kit is built of 3 Proximity Sensors (Click here to view). Proximity Sensors make “Homing the Table” fast, easy and worry-free. Three Proximity Sensors include cabling, brackets, fasteners and a Homing Guide to automatically set your table to X=0, Y=0, available in your Owners Document Access Link.
GANTRY ASSEMBLY & MOTORS
- Aluminum Gantry: is an assembled, extruded aluminum gantry with a 5.75″ inch Clearance and a Z-Axis vertical travel of 5.5″ inches (Click here to view). The Gantry & Table are equipped with a Standard Linear Guide Assembly and Standard Rack & Pinion for the Gantry (Click here to view) and Table (Click here to view). Includes Gantry Carriage Shields to protect from splashing (Click here to view). We recommend using WD-40, Scouring pads & Microfiber Towels to clean your table. Make sure to source Lithium Grease Blend (EP00 or EP000) (not included in purchase) & an Ares Grease Gun Kit (not included in purchase) to maintain your linear guides Carriage bearings.
- Gear Reduction Motor System: consists of three (3) Motors & Housings with a 3:1 Ratio Gear Reduction System (Click here to view). The Gear Reduction System is composed of belt driven engineering with a pivotal focus on shifting strain, wear and tear away from the motors. Weight shifts towards belt. Motor focuses on increased speed & fluid motion. Higher motor speeds may alter expectations of best cut quality results. The 3:1 Gear Ratio provides fluidity between X&Y Coordinates when cutting circular or rounded outputs. Our System is also accompanied by the 4th stepper motor, the Z-axis Linear Stepper Motor Positioner. The Motors are backed by Durable Automation Wiring, Handcrafted & Labeled in-house at STV®CNC (Click here to view). As for Motor Specifications, Motor’s Motion Accuracy is about 0.002” per 12″ inches, the Step Resolution is about (+) or (-) 0.0005” inches and a precision margin of error between 0.02″ – 0.05″ for every 10′ feet travelled. The STVCNC Gear Reduction Motor System is also backed by our Advanced Cable Management (Click here to view) that carries the Automation Wiring & Power Cabling out to the Control Box on the left side of the plasma table (Click here to view). Extended Timeframe considered for regular wear & tear mainly towards the belt & gear housing. Important: Gear housing may require maintenance checks on gear tightness over an extended length of time to keep in proper standing and avoid future delays in production.
SOFTWARE
- Downloadable MyPlasmCNC & Controller: The Standard Control System, MyPlasmCNC, is the basic CNC Control System for Beginners in Fabrication or industrialists who desire to learn a less complex CNC cutting program. The MyPlasm Software & Controller is backed by the STV® Team for Troubleshooting as we offer Step-by-Step Tutorials that guide you through basic software & table operation. You also have the option to purchase a Laptop from our add-ons list of which will include the MyPlasm CNC Software pre-installed. You will also have pertinent Manuals & Documentation that will assist you within your Owners Document Access Link. (MyPlasmCNC works with File Types: .dxf, .plt, .tap, .2d, .hpgl files. It also includes MyMiniCAD to draw out parts for production. We recommend using Inkscape and/or QCAD to facilitate design & cut file creation.)
- ASK FOR A CONTROL SYSTEM UPGRADE: Call 1-855-930-1118 to upgrade your Control System. Optimum CNC is the All-New CNC Control System uniting industrialists worldwide and backed by our highly recognized Tech Support and private Optimum CNC community. The Upgrade includes the Linux Os, palm-sized Mini PC with the Optimum CNC Software pre-installed and is dedicated solely to table operation. Software, Profile and Firmware Updates are FREE and updated via software. OptimumCNC has no subscription or fees. Change log available on optimumcnc website (Click here). Includes Ethernet Cable & Power Cable. One of the best takeaways from the OptimumCNC Mini PC, is unlike Windows-based platforms, Optimum CNC runs on a Linux-based platform not subject to any Windows Updates that may affect CNC software functionalities. The Optimum CNC Control System also includes 80+ Editable Shape Templates within OptimumCNC CAD/CAM, and accepts .dxf, .gcode, .nc, .dnc, .iso, .tap, .txt, .NC, .CNC file types. Import G-code, DXF Files & Generate G-code, View G-Code + M.D.I. Keyboard. Includes Integrated Hypertherm® Cut Charts along with setting and saving your own Custom Cut Settings in the OptimumCNC software. For more information about Optimum CNC in general visit: optimumcnc.com or watch Optimum CNC Tutorial videos (You will be required to source a monitor display, wireless mouse & keyboard where applicable. If you are accustomed to working with heavy processing CAD/Design Software and file storage, we recommend sourcing a gaming laptop or computer with a daily task to transfer cut files via USB to the OptimumCNC MiniPC when needed.)
- 1000+ DXF Cut files: Included in your purchase will be your “Table Owners Access Link” which contains all manuals, documents, tutorials, video art sessions and a library of 1000+ DXF cut files to start with.
WARRANTY
- STV®CNC Manufacturer’s One Year Warranty. In Fabrication, issues happen & we’re here for you. Within your warranty, we can quickly ship out replacement parts that are damaged or defective. Ground shipping for replacement parts is covered in your warranty, any additional faster expedited services will be covered by the table owner. Moreover, our table components are always in-stock and affordable even after your warranty has expired.
TECH SUPPORT
VIP ACCESS
- With your purchase you’ll gain Access to the STVCNC Private Plasma Table Owner’s Facebook Community, where we share files, skills and settings amongst the 2300+ Members of our Worldwide Fabrication Network. With STV®CNC you’ll gain access to purchasing Hypertherm® Consumables/Cartridges and Plasma Guard STV® and obtain in-house STV®CNC dedicated tech support for software, product & table operation.
CALL 1-888-701-7101 to Calculate Shipping Distance & Delivery requirements.
All STV®CNC PPRO Welded Frame Plasma Tables are shipped fully built to your location via Flatbed Hotshot Shipping (CLICK HERE TO VIEW). The “Distance Cost & Handling” will need to be determined before full purchase, check with your Sales Agent at 1-888-701-7101 to complete your order’s details.
The SPARX PRO 12 Plasma Table weighs 2100 lbs. (excludes any additional add-on purchases to the order.)
➤ OPTION 1: PICKUP. Dimensions: L:14′ x W:9′ x H:5′. You have the FREE option of picking up your item, available at our facility. Schedule with your Sales agent for Pickup Day/Time. For “Self Pickup” please have ready “TARPS & STRAPS” (CLICK HERE TO VIEW) for securing and protecting your load against the elements. An ideal flatbed trailer “without fenders” will work. Any concerns on your trailer meeting requirements, please confirm with your sales agent for further details.
6160 N. Hollywood Blvd. #110, Las Vegas, Nevada, USA 89115 MAP ▶
➤ OPTION 2: SHIP. Call 1-888-701-7101 to Calculate Continental U.S. Shipping of Distance Cost & Handling. Check with your Sales Agent on this. Flatbed Hotshot Shipping (CLICK HERE TO VIEW). A Forklift will be required at your location upon delivery for unloading. Excludes Hawaii, Alaska & Puerto Rico (see “Sea Freight” below).
SHIPPING QUESTIONS
➤ Are there any ADDITIONAL SHIPPING COSTS?
Any of the next 5 scenarios may apply in the shipping of your item.
01. COMMERCIAL DELIVERY: Check with your Sales Agent for your order’s shipping details.
02. LIMITED ACCESS: Check with your Sales Agent for your order’s shipping details.
03. RESIDENTIAL DELIVERY: Check with your Sales Agent for your order’s shipping details.
04. LIFTGATE: Check with your Sales Agent for your order’s shipping details.
05. SEA FREIGHT – For International orders, you will need to cover U.S. Ground Shipping from Las Vegas to the Port of your choice. After that, you will need to organize your choice of Sea Freight to pick up at that port and have it shipped to your location. If you have a moment, search for Sea Freights to your location and inform us with the Port location we will be shipping to within the U.S. and we can go from there.
➤ What happens at DROP OFF?
The Flatbed Hotshot Shipping (VIEW) will deliver your table to the location you provided. Please advise your STV®CNC Sales Representative with any delays, gate codes, special entry requirements or deadlines that might hinder or prevent delivery attempts. Please check the table before Delivery is completed to ensure no damages were incurred during transportation. Please make sure you have a forklift and two (2) long 4×4 long wooden beams to side-unload your table from the delivery flatbed truck.
➤ How do you SHIP your PRO plasma tables?
We have a couple different ground Flatbed Hotshot Shipping (VIEW) carriers. The shipped plasma table ships with straps and tarps to protect it against the elements during transportation. Pickup at our Facility is also an available option.
➤ Do you ship to Canada, Dubai, Hawaii, Mexico or International?
To an extent; For International orders or locations out of the Continental United States, you will need to cover U.S. Ground Shipping from Las Vegas to the Port or Terminal of your choice. After that, you will need to organize your choice of Ground or Sea Container Freight to pick up at that port and have it shipped to your location. If you have a moment, search for sea freight carriers to your location and inform us with the Port location we will be shipping to within the U.S. and we can go from there. You will be required to delegate the international brokerage and fees.
➤ Can I pick up my PRO Table at the Terminal?
Potentially, depending on your location and whether or not you have a truck or trailer able to pull 1250 to 2100 lbs. of weight (depending on the PRO table size you purchased.) Check with your sales agent for trailer fitting.
PAYMENT
➤ TAXES: If you reside in the State of Nevada, you will be charged Nevada Sales Tax. Sales tax will not be added to orders if the purchaser resides outside of the State of Nevada.
➤ PAY BY PHONE: We can take a payment via phone. We’ll follow thru to provide you with a “paid in full receipt” and confirm the shipping address before sending the purchase order into production.
➤ PAY BY INVOICE: We can send you an interactive invoice of the items requested where you can tap on the “Pay Now” Tab to proceed with a Credit card, Venmo, Amazon Pay, PayPal or Wire transfer.
➤ REQUEST AN ESTIMATE: We can send you an estimate price quote prepared of the items requested.
➤ PAY ONLINE: There are products on our website that require lead time check and/or calculation of flatbed hotshot trucking distance to your location. A full online experience will not be possible, one will have to call 1-888-701-7101 to verify your order’s details.
➤ PAY VIA SCHOOL/GOVT/UTILITY: For Public Universities, Schools, Government agencies & Utilities, please provide your Purchase Order with Net30 Terms along with your vendor package.
➤ PAY VIA FINANCING: We also via third-party offer financing for your purchase. One can quickly apply for financing and be approved in as little as 3 minutes. Read more
We recommend the following aside from your table purchase. Questions? Speak with our support staff at 1-888-701-7101
Equipment & Material Recommendations:
- Plasma Guard STV®: Anti-rust solution for your table that protects your water pans, slats and cutting pieces from rust. Read more
- Hypertherm® Consumables: These Consumables are for your Mechanized Torch in the cutting process VIEW.
- Plasma Cutter Power Setup: VOLTS: 200-600VAC, AMPS: 50 (Contact Plasma Manufacturer for Electrical Setup.)
- Computer/Control Box Power Setup: VOLTS: 110, AMPS: 20 (Contact a Professional & Certified Electrician for Electrical Setup.)
- Plasma Cutting System & Torch: Hypertherm® Powermax45®XP or a Hypertherm® Powermax45 SYNC® Plasma Cutting Unit with a Mechanized Torch.
- Air Compressor: Plasma Cutting Units require an air compressor to provide quality cuts with minimal dross. Source an Air Compressor with a Minimum of: Capable of 6 SCFM at 90 PSI. You are more than welcome to check with other owners in the Private Community to help your choice.
- Air Dryer: Plasma Cutting Units require dry air to provide cleaner cuts with minimal dross. Source a Refrigerated Air Dryer or dessicant filter system that will match your compressor specs. You are more than welcome to check with other owners in the Private Community to help your choice.
- Computer: If you plan on designing your own cut files, you may want to source a design computer or laptop with higher processing power for File Designing & File Storage. Minimum of 3 GHz Desktop Computer or Laptop, WindowsXP or newer with 16 GB RAM, 250 MB storage, 2 USB ports.
- Metal Supply: Source your nearest Metal Sheet Supplier in your area.
- Water Agitation: We recommend if one cuts a wide variety of materials on their plasma table, to install a water filtration system that agitates the water. Install an Aerator, Bubble Muffler or Water Filtration System for Surface Agitation, Oxygenation & Water bed Gas Dissipation. Clean any submerged, cumulative surface areas or Hydrogen gas trapped pockets of Aluminum particles in your water bed. (Especially prevention against the mixing of aluminum particles with mild steel particles in your water bed.)
- Safety & Prevention: Dust Removal system, PPE: Eye & Ear Protection, PPE: Respirator, On-site Ventilation
Tools for Table & Assembly Recommendations:
- Sealant: For Modular Tables Water pan Assembly, we recommend you sourcing 100% WATERPROOF SILICONE of your choice to seal the gap between each water pan. Other sealing options are welding your water pans or installing gaskets. Many customers have custom cut their water pans to install a water agitation/filtering system, additional advice on this is available in the private Facebook community.
- Caulking Gun: Assists in sealing the water pans with the application of waterproof silicone.
- Exposure: This is an INDOOR Plasma Table. Not recommended for outdoors or exposure to an outdoor environment. Maintain table & wipe linear guides down with WD-40 and scouring pads regularly.
- Interference: The crossing of cables may cause interference. Make sure that your TORCH CABLE does not touch the Z-Motor at the top of your Z-Axis Head.
- Grounding Rod: Install an 8′ foot Earth Grounding Rod to prevent interference. We recommend installing the earth grounding rod to avoid material waste & any possible mechanical ghost movements that interference may cause.
- .Hypertherm® Grounding Recommendations: To make sure of personal safety and correct operation, and to decrease electromagnetic interference (EMI), the plasma power supply must be correctly grounded. Refer to the Safety and Compliance Manual (80669C) for more information on grounding. For mechanized cutting systems, refer to EMI grounding and shielding best practices in the Powermax45/65/85/105 SYNC Mechanized Cutting Guide (810480).
The plasma power supply must be grounded through the power cord according to national and local electrical codes.
1-phase service must be of the 3-wire type with a green or green/yellow wire for the protective earth ground. 1-phase service must comply with national and local requirements. Do not use a 2-wire service.
3-phase service must be of the 4-wire type with a green or green/yellow wire for protective earth ground. 3-phase service must comply with national and local requirements
- Digital Caliper: Helps measure cut outs & metal sheets.
- Magnet Stick: Helps remove cut pieces/debris/tip-ups off of the table and/or water pans.
- PPE Gloves/Eye Protection: Work Gloves to help handle any cut parts that may still be hot and transfer of metal sheets in production. Consider Eye protection from any debris or Plasma Cutting glare or sparks. Follow Safety Precautions in your Hypertherm® Safety Guide.
- Zip ties: help keep cables organized & prevent interference as you strap cables & torch to your Cable Swing arm. Important: Make sure you UNCOIL your cables. This includes the excess of your Torch cable, the PC cable and Grounding Work Lead Clamp.
- Other tools for Assembly: Standard & Millimeter Allen hex key and wrench set, Hex Socket/Wrench Set, Hex Socket Drill, Level, Large Pliers, Rubber Mallet for slat installation, Tape Measure, Utility Safety Gloves/Latex Gloves and Two short wooden blocks of the same length to assist in gantry alignment.
Clean Time / Maintenance Recommendations:
Cleaning time is usually between 30 minutes to 3 hours, depending on what water pan coating you have chosen to apply. It may take longer if water pans are raw steel.
- How do Table Owners prep their water pans for easy cleaning? Many of our Table Owners have chosen to coat their water pans in different ways with: POR 15, & high temp (high aluminum) silver paint, Marine Grade Epoxy, Duralux Marine Primer & Paint, Powder Coating, Powder Coating with Anode rods, Ospho & copper-infused boat bottom paint, Water District 3M Powder Coat product, 1/8″ thick layer of Flex Seal.
- WD-40 & Scouring pads & Microfiber Towels: Assists in table maintenance and cleaning.
- Lithium Grease Blend (EP00 or EP000) & an Ares Grease Gun Kit: Assists in table maintenance for Carriage bearings.
- Water Pump: Assists in table maintenance and water removal.
- Green Light Checklist: We have prepared 8 key points to check at your site of production to ensure a successful cut. Visit the Green Light Checklist at www.stvcnc.com/greenlightchecklist
- Other tools for Cleaning: Tools many Table Owners have used: Needle Scaler, Scraper, Wire Wheel, Weed burner, Wet Sand Blasting, Shop Vacuum, evaporative cooler pump, Red Tip Pressure Washer.
➤ We also recommend one get the approval of their spouse. Sorry we don’t make the rules, they do.
➤ FACTORY-DIRECT. We pride ourselves in managing and organizing our manufacturing output of CNC Tables as they roll off our Factory Production Line. Get your order in to be queued up for Production and Delivery today. Up to date lead times are available by calling your STV® Sales Agent at 1-888-701-7101.
➤ For International Orders or locations out of the Continental United States, you will need to cover U.S. Ground Shipping from Las Vegas to the Port or Terminal of your choice. After that, you will need to organize your choice of Ground, Shipping Carrier or Sea Freight to pick up at that port and have it shipped to your location. If you have a moment, search for freight carriers to your location and inform us with the Port location we will be shipping to within the U.S. and we can go from there. You will be required to delegate the international brokerage and fees. Call 1-888-701-7101 for more info.
SUPPORT
The SparX PRO Platform is backed by our Golden Prestige℠ Technical Support that offers solutions across a wide range of customer support methods like Table Troubleshooting, Live Support via remote assistance, as well as Hypertherm® Unit Troubleshooting well before any escalation occurs and enjoying the ease of having us delegate any replacement parts to prevent any extended amounts of down-time.
Table & Software Dedicated Live Support
Our STV® Team Members are knowledgeable in troubleshooting topics on Table Operation, maintenance & software during business hours. We love to dedicate our full attention to troubleshooting. You can fill out the Support Ticket at www.stvcnc.com/support and we’ll contact you directly with the solutions to meet your needs. We’re available via phone with Tech Agents on queue, feel free to call 1-855-974-4413. Time is essential in getting you up and running on the basics for table operation, software and daily tasks. After watching our tutorial videos, we are here for any one-on-one phone calls or remote assistance where all support ends with solutions. You also will have additional support via our Private Nationwide Facebook Community.
After Hours Active Community
We currently have over 2,300+ savy and successful Plasma Table Owners who spread across various industries. The Facebook Private Community is healthy, positive and always forward moving for improvement & growth. https://www.facebook.com/groups/470011710395310/
Connect with a Neighboring STV®CNC Table Owner
We have thousands of STV®CNC Plasma Table Owners spread out across the nation. Reach out to us 1-855-974-4413 on having you connect with others near your location. Click here to find a SparX PRO Table Owner near you.
Step-by-step Instructional Videos
We want to make sure we speed up you and your team’s learning curve. We’ve made sure to produce helpful step-by-step tutorial video sessions to make that happen. Time is essential in getting you up and running on the basics for table operation, software and daily tasks. After watching our tutorial videos, we are here for any one-on-one phone calls or remote assistance where all support ends with solutions.
Replacement Parts & Product Support
STV®CNC is a proud OEM Distributor for all Hypertherm® products, including Plasma Cutting Units, consumables, cartridges & accessories. Issues happen & we’re here for you. Within your warranty, we can quickly ship out components that may have failed over extensive wear & tear. Our table components are always in-stock and affordable even after your warranty has expired. We also provide tech support for Hypertherm® products before escalation.
Troubleshooting Topic? Check out our Greenlight Checklist (Click here to view) or contact Tech Support at www.stvcnc.com/support
ADD-ONS
These STV®CNC add-ons are additional accessories that one can customize and upgrade their table. Feel free to tap on Product details to read more on each Add-on and its benefits.
Plasma Guard STV®
Anti-Rust Solution: Decrease production dust/debris, preserve your water pans & avoid any oxidation. The Blue Anti-Rust Solution by PICO Chemical arrives in a 5 Gallon Bucket. Tap on the button for Dilution Rates for your Table Size. Call 1-888-701-7101 if you need a 55Gal / 330Gal size.
Windows Laptop
Windows Laptop with MyPlasmCNC Controller is dedicated solely for “Table Operation” with USB Connectivity. We recommend sourcing a secondary laptop with enough processing power for file storage & heavy Design/CAD programs using a USB to transfer files to this laptop when needing to cut. Laptop Make and Model may differ upon availability. (This Windows Laptop PC is “NOT” to be confused with the Linux MiniPC offered with the Optimum CNC Controller.) The MyPlasmCNC Controller Software is downloadable to install as desired, if this add-on is not selected.
Powerstation Cart
42″ inch Mobile Workstation Cart. Maximize your workspace with this Double Shelf PC standing desk. Includes Adjustable height, 15′ ft. Triple Outlet Power Strip, Cabinet w/ Lock, Gliding Tray & Locking Caster Wheels.
STV®CNC Rollerballs
STV®CNC Rollerballs. These transfer bearings are ideal for individual loading material efficiently. Recommended to protect the table and offer the additional ease of loading or shifting steel sheets onto your production table. These material support ball transfers are durable and practical, made of steel and rotate 360°degrees.
Hypertherm® Cartridges
STV®CNC is a Proud, Leading Hypertherm® OEM Distributor offering the best pricing in Hypertherm® Plasma Cutting Units, Consumables/ Cartridges, Replacement parts & Accessories. Tap the button to see the Cartridge Ordering Hub we’ve built.
FACTORY TOUR
BOOK A TOUR OF STV®CNC
Las Vegas is home to our STV®CNC family of dedicated staff members. We would love to have you see our 50,000 sq. ft. Headquarter Operations. CLICK HERE TO BOOK A TOUR.
HYPERTHERM®
IMPORTANT: Depending on the model you select, Plasma Cutting System lead times fall into a queue list for each model series as we receive them from Hypertherm® and out to you. In 100% transparency, we strive to deliver a well-rounded experience. Feel free to call us to chat about lead times. 1-888-701-7101.
Hypertherm® Powermax45 SYNC® $3300
1/2″ INCH PIERCE VIEW PDF
Includes Cutting System, 25ft SmartSYNC® Mechanized Torch, Work Lead, Set of SYNC® Cartridges, Ohmic Rings, Cut Charts & Manual, USB Instructional.
3 Year Warranty for Unit & 1 Year for Torch.
INCLUDES FREE 8FT OPTIMUM CPC INTERFACE CABLE ($200 VALUE)
Hypertherm® Powermax65 SYNC® $4375
5/8″ INCH PIERCE
Includes Cutting System, 25ft SmartSYNC® Mechanized Torch, Work Lead, Set of SYNC® Cartridges, Ohmic Rings, Cut Charts & Manual, USB Instructional.
3 Year Warranty for Unit & 1 Year for Torch.
INCLUDES FREE 8FT OPTIMUM CPC INTERFACE CABLE ($200 VALUE)
Hypertherm® Powermax85 SYNC® $5650
3/4″ INCH PIERCE
Includes Cutting System, 25ft SmartSYNC® Mechanized Torch, Work Lead, Set of SYNC® Cartridges, Ohmic Rings, Cut Charts & Manual, USB Instructional.
3 Year Warranty for Unit & 1 Year for Torch.
INCLUDES FREE 8FT OPTIMUM CPC INTERFACE CABLE ($200 VALUE)
Hypertherm® Powermax105 SYNC® $7300
7/8″ INCH PIERCE
Includes Cutting System, 25ft SmartSYNC® Mechanized Torch, Work Lead, Set of SYNC® Cartridges, Ohmic Rings, Cut Charts & Manual, USB Instructional.
3 Year Warranty for Unit & 1 Year for Torch.
INCLUDES FREE 8FT OPTIMUM CPC INTERFACE CABLE ($200 VALUE)
Hypertherm® Powermax125® $9900
1″ INCH PIERCE VIEW PDF
Includes Cutting System, 25ft Duramax® Hyamp™ Mechanized Torch, Work Lead, Standard Consumables, Cut Charts & Manual.
3 Year Warranty for Unit & 1 Year for Torch.
INCLUDES FREE 8FT OPTIMUM CPC INTERFACE CABLE ($200 VALUE)
ADAPTERS
Adapters are a list of Cables, Hand Torches or Mechanized Torches if you already own a Hypertherm® Plasma Cutting System or if you require an “additional” Hypertherm® Accessory for the purchase of a new plasma system. If you are purchasing a New Plasma System, it already includes the necessary Mechanized Torch & STV®CNC CPC Cable that applies along with the unit.
STV®CNC CPC Interface Cable
Add this item to your cart “ONLY” if you are an existing Hypertherm® Plasma System Owner & require a CPC interface cable. If you purchase a Plasma Table with us & decide to use your personal plasma system or decide to purchase one elsewhere, you will need to purchase this item to connect the plasma cutting system to our Control Box.
Hypertherm® Mechanized Torch (25ft.)
Add this item to your cart “ONLY” if you are an existing Hypertherm® SYNC® Plasma System Owner & require a Mechanized Torch. This Hypertherm® Item is 25 feet in length. Call 1-888-701-7101, if you require a longer torch length.
Hypertherm® Hand Torch (25ft.)
Select “ONLY” if you are an existing Hypertherm® Plasma System Owner & require a separate Hand Torch. The 25 foot Duramax® 75° hand torch is well suited for a variety of applications such as gouging, fine feature cutting, extended reach cutting, and flush cutting. The ergonomic design of the 75° torch is perfect for normal cutting.
FINANCING
Financial Assistance for your STV®CNC Order is available through First Citizens Bank or through an assorted list of top financing lenders. Quicken Equipment Ownership with flexible terms that work best for your operation.
STV®CNC offers financial assisting options through First Citizens Bank or through an assorted list of available top lenders who offer different tiers of financing. Finance essential CNC equipment, Plasma Tables or Router Tables for your business. Expand your financing options. Get the resources you need to make your business flourish with an exceptional financial backing with options that work best for you. With experience working with small businesses we know what it takes to start, expand and have the correct measures that will support your daily operations along with any flexible small business loans and financing solutions to meet your needs.
General Information about our In-house built CNC Plasma tables.
Get a high-end, fully-welded and assembled 6×12 CNC plasma table for your business at a price that makes sense.
- Industrial-grade level CNC plasma table for small to large sized industrial and fabrication markets.
- Professional plasma table that uses high-end machine features and capabilities.
- Included water table helps to reduce dust and metal warping.
Are you looking for a new CNC plasma table for your business? Then the STV®CNC SparX™ Welded PRO 12 Plasma Table is just what you need. This industrial level CNC plasma table is perfect for companies just getting started with CNC machining or for those looking to increase production capabilities. With several advanced attachments like a water table that helps prevent dust and metal warping from the high levels of heat and the included automatic torch height control, you’ll be able to create amazing metal designs. With high-end components, this plasma table delivers some of the best plasma cutting speeds and consistency around. Get your 6 x 12 automated plasma table today!
- Uses Windows OS interface
- Several advanced attachments included
- Dry or water pan options available
- Automatic torch height control included
We have applied the best technologies of high-end, industrial level CNC plasma tables at a competitive price. The STV®CNC SparX™ Pro Plasma Table Series incorporates high-end machine features and capabilities, in a simple but effective package. Using our high accuracy stepper motors for speed, control and smooth operation and combining it with ground linear bearings and guide rails results in consistency and speed that is unrivaled in the industry. Additionally, our tables are built tough and designed to easily handle inch thick steel plates and they can handle much more. Proudly made in the USA.
STV®CNC Reviews –
➤ Click here to Read Reviews & Comments.